When it comes to application of paint on ferrous and non-ferrous surfaces, industrial paints are designed to provide a better and effective option. Whenever they are used on any surface, whether it is iron, aluminum or steel, these paints require a bit of modification for them to be more effective. In order to improve your chances of the best possible finish, you need to be knowledgeable in the method of painting that is to be used on the particular material you are dealing with.
Painting steel is one of the simplest things you will do in industrial painting. Despite the ease of painting, you won’t get a smooth finish unless you use the most appropriate methods to eliminate grease, rust, and debris, which could cause the surface to be uneven. Since you need to surface to be bare steel, you have to use sandblasting, hand power tools, and solvent degreasing. No matter the tool that you intend to use, make sure that it works perfectly to get rid of all the impurities from the metal leaving it clean, smooth, and ready for a fresh coat of paint.
Aluminum is one of the hardest metals to prepare for industrial painting. Use methods such as a scrubber or acid wash when you want to remove impurities from aluminum for the surface to be smooth and perfect for painting. After the cleaning, apply the paint carefully leaving it to settle too on the fissures created during the painting process in order to give a smooth finish. The paint should be spread evenly throughout the surface in order to give your aluminum surface a smoother finish.
What Has Changed Recently With Coatings?
While plastics and acrylics can be painted using the industrial paints and coatings, it is worth noting that they normally respond very differently to the products. Solvents used in these kind of products tend to vary hence the huge difference. You should, therefore, embark on using water-reducible coatings in order to stop damages from occurring. Since some bright paints have pigments that have a poor hiding nature, the semi-transparent properties of certain acrylics are noticeable during painting. Such a situation calls for a thick coat of primer to provide better adhesion and even virtually eliminate the filtered light that might come through the acrylic surface.
Interesting Research on Coatings – What No One Ever Told You
Whenever you are tasked to use industrial paints on any kind of material, you have to begin with a test spot. These test spots need to be prepared in a proper manner similar to the way the entire material is to be prepared for painting. Using this spot, you will get to know which paints work best and those that do not. In addition, you will know if the paint is compatible with the product you intend to get at the end.